Monday, November 20th 2017, 10:00pm UTC+1

Giriş yapmadınız.

  • Giriş
  • Kayıt

Sayın ziyaretçi, NAS Forum sitesine hoş geldiniz. Eğer buraya ilk ziyaretiniz ise lütfen Yardım bölümünü okuyunuz. Yardım bölümü bu sitenin nasıl çalıştığını açıklamaktadır. Site özelliklerinin tümünü kullanabilmeniz için öncelikle kayıt yaptırmanız gerekmektedir. Kayıt yaptırmak için kayıt formunu okuyabilir ya da kayıt işlemi hakkında daha fazla bilgi edinebilirsiniz. Eğer önceden kayıt yaptırdıysanız, buraya tıklayarak giriş yapabilirsiniz.

zydoon

Acemi

Mesajlar: 19

Konum: Tunis

1

Wednesday, January 7th 2009, 8:32am

telnet ok, ftp not accessible, ssh "Bad packet length"

Actually there's is telnet, but ...

ftp is not accessible, unless:

Kaynak kod

1
chmod a+x /etc

every reboot of the NAS.

and PLEASE, can someone show me how to access the default public share via FTP ?

If I get SohonasTinky-130608 , the ssh server is not accessible, because of this error:

Kaynak kod

1
2
3
[root@mishket ~]# ssh root@sohonas
root@sohonas's password: 
Disconnecting: Bad packet length 2115447630.
Verbatim SmartDisk SOHO NAS | Rev. D | 2.3.2-mu-02.2

HWguru

NAS2000-Team

Mesajlar: 1,001

Konum: Wien

2

Wednesday, January 7th 2009, 10:09am

Hi,
the problem with ssh could reside on the client side.
Try google with +"Bad packet length" +ssh

ftp: Maybe Thomas made a mistake when creating the Tinky package and some files have wrong access rights.
As you are familiar with linux you could unpack the firmware, mount the ramdisk, make changes and pack it again.

unpack and mount for modification...

Kaynak kod

1
2
3
gunzip rd.gz
mkdir /mnt/tmp
mount -t ext2 -o loop rd /mnt/tmp

packing...

Kaynak kod

1
2
3
umount /mnt/tmp
gzip rd
tar cvzf MyNewImage.tgz rd.gz ImageInfo


Attention: File must fit into the part of the flash!

HWguru
Leute ohne Laster haben oft wenige Tugenden...
NAS2000 2.3.2.IB.2.RS.1+Lüfterabschaltung+SSH+do_it+zusätzliche commandline tools+changed root password
1. suchen - lesen - Google - lesen - 1. Fragen gehören ins Forum, dann profitieren alle davon!

zydoon

Acemi

Mesajlar: 19

Konum: Tunis

3

Monday, January 19th 2009, 9:07am

what's the redboot's IP

Hi again every bode, I was on vacation.

now back to this problem, I prepared a ramdisk with /etc executable to everybody, but now I just can't connect to redboot.

It seems not the 192.168.2.71 did Thomas changed it ? someone knows it ? or how to know it ?

I have this firmware

kind regards,
Zydoon.
Verbatim SmartDisk SOHO NAS | Rev. D | 2.3.2-mu-02.2

HWguru

NAS2000-Team

Mesajlar: 1,001

Konum: Wien

4

Monday, January 19th 2009, 10:41am

Hi,
standard IP is 192.168.2.71 if you have not changed it.

You should try to reach the bootloader with Flashstart.

You could also try to apply the firmware update through the web interface. There is a new article at nas portal describing this. But you have to check if it is done in the same way as on the Raidsonic NAS.

Regards, HWguru
Leute ohne Laster haben oft wenige Tugenden...
NAS2000 2.3.2.IB.2.RS.1+Lüfterabschaltung+SSH+do_it+zusätzliche commandline tools+changed root password
1. suchen - lesen - Google - lesen - 1. Fragen gehören ins Forum, dann profitieren alle davon!

zydoon

Acemi

Mesajlar: 19

Konum: Tunis

5

Monday, January 19th 2009, 10:59am

Did IT :)

Hello again,

Thomas changed the NAS's IP address, it's 192.168.0.9

I found it thanx to arping2, you can find it here, and RPM ready for RHEL5 or CentOS is provided by Dag
all you have to do is, ping your NAS, when it's alive, get its MAC addr, power it off, start arping2 <MAC>, power it on again, and you'll get the IP Addr.

Kaynak kod

1
2
3
4
5
6
7
8
9
[root@mishket ~]# ping 192.168.0.11
PING 192.168.0.11 (192.168.0.11) 56(84) bytes of data.
64 bytes from 192.168.0.11: icmp_seq=1 ttl=64 time=0.750 ms
^C
--- 192.168.0.11 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 690ms
rtt min/avg/max/mdev = 0.750/0.750/0.750/0.000 ms
[root@mishket ~]# arp -an 192.168.0.11
? (192.168.0.11) at 00:18:97:00:3d:24 [ether] on eth0

than you power it off, using telnet, launch arping2 and ON again

Kaynak kod

1
2
3
4
5
6
7
[root@noor ~]# arping2 00:18:97:00:3D:24
ARPING 00:18:97:00:3D:24
60 bytes from 192.168.0.9 (00:18:97:00:3d:24): icmp_seq=0 time=579.834 usec
60 bytes from 192.168.0.9 (00:18:97:00:3d:24): icmp_seq=1 time=403.881 usec

--- 00:18:97:00:3D:24 statistics ---
2 packets transmitted, 2 packets received,   0% unanswered


now you ready to roll on.

I cannot attach the repacked Ramdisk here because it's more than 200ko, but it works fine for me.

someone has a place where to host it ?
Verbatim SmartDisk SOHO NAS | Rev. D | 2.3.2-mu-02.2

HWguru

NAS2000-Team

Mesajlar: 1,001

Konum: Wien

6

Monday, January 19th 2009, 7:20pm

Hi, I added the modified ramdisk to the database for download.

HWguru
Leute ohne Laster haben oft wenige Tugenden...
NAS2000 2.3.2.IB.2.RS.1+Lüfterabschaltung+SSH+do_it+zusätzliche commandline tools+changed root password
1. suchen - lesen - Google - lesen - 1. Fragen gehören ins Forum, dann profitieren alle davon!

zydoon

Acemi

Mesajlar: 19

Konum: Tunis

7

Tuesday, January 20th 2009, 8:52am

Thank you
Verbatim SmartDisk SOHO NAS | Rev. D | 2.3.2-mu-02.2