Friday, November 24th 2017, 2:55am UTC+1

Giriş yapmadınız.

  • Giriş
  • Kayıt

Sayın ziyaretçi, NAS Forum sitesine hoş geldiniz. Eğer buraya ilk ziyaretiniz ise lütfen Yardım bölümünü okuyunuz. Yardım bölümü bu sitenin nasıl çalıştığını açıklamaktadır. Site özelliklerinin tümünü kullanabilmeniz için öncelikle kayıt yaptırmanız gerekmektedir. Kayıt yaptırmak için kayıt formunu okuyabilir ya da kayıt işlemi hakkında daha fazla bilgi edinebilirsiniz. Eğer önceden kayıt yaptırdıysanız, buraya tıklayarak giriş yapabilirsiniz.

1

Friday, June 10th 2011, 7:38am

nas01sg - JTAG access problem, NOT in debug-mode

i need to jtag my box
but i can not set debug mode
i short nas pin 1 and 2 with Pin 17
NAS_FlashTool show

Cable type 4 detected.
Error: Device is NOT in debug-mode.

Some errors detected!

so next steep?
ths any help :P

HWguru

NAS2000-Team

Mesajlar: 1,001

Konum: Wien

2

Friday, June 10th 2011, 9:35am

Hi,
you did it well. If you get the message "Cable type 4 detected" you adapter seems to work.

You have to make this connection before you power on the nas.
Can you measure the voltage on this connection to GND?

Please turn on "Verbose Output" in NAS_FlashTool and post the result here - use the code button "#"
You may copy/paste the text from the tool's window.

Regards,
HWguru

P.S. I changed the thread title (most of the users need help :rolleyes: ) and the thread will be moved later
Leute ohne Laster haben oft wenige Tugenden...
NAS2000 2.3.2.IB.2.RS.1+Lüfterabschaltung+SSH+do_it+zusätzliche commandline tools+changed root password
1. suchen - lesen - Google - lesen - 1. Fragen gehören ins Forum, dann profitieren alle davon!

3

Friday, June 10th 2011, 12:49pm

thks you help.
NAS_FlashTool show:


Testing cabletype 3
JTAG-IDCODE: 0xf0000000 - not OK
Expected: 0x00526fa1
Bypass-test: 0xfc000000 - not OK
Expected: 0xaaab5554

Testing cabletype 4
JTAG-IDCODE: 0x00526fa1 - OK
Bypass-test: 0xaaab5554 - OK

Cable type 4 detected.
Error: Device is NOT in debug-mode.

Some errors detected!


I chk NAS VCC PIN and GND PIN 2.2V-2.5V
cpu is work?
soryy my bad english :D

HWguru

NAS2000-Team

Mesajlar: 1,001

Konum: Wien

4

Friday, June 10th 2011, 1:44pm

Hi,
VCC must be about 3.3V!
2.5 is too low. Check the power supply.
What happened to the nas, why do you need JTAG?

HWguru
Leute ohne Laster haben oft wenige Tugenden...
NAS2000 2.3.2.IB.2.RS.1+Lüfterabschaltung+SSH+do_it+zusätzliche commandline tools+changed root password
1. suchen - lesen - Google - lesen - 1. Fragen gehören ins Forum, dann profitieren alle davon!

5

Saturday, June 11th 2011, 11:38am

i add atx power 3.3V to NAS VCC and GND PIN
BUT

NAS_FlashTool show

Testing cabletype 3
JTAG-IDCODE: 0xf0000000 - not OK
Expected: 0x00526fa1
Bypass-test: 0xfd000000 - not OK
Expected: 0xaaab5554

Testing cabletype 4
JTAG-IDCODE: 0x000149b8 - not OK
Expected: 0x00526fa1
Bypass-test: 0xff800000 - not OK
Expected: 0xaaab5554

Error:
- No cable detected
- Testdevice not connected

Some errors detected!
:think:

6

Saturday, June 11th 2011, 12:05pm

if power on nas
comm usb cable
nas power off
Press "JTAG test" show


Testing cabletype 3
JTAG-IDCODE: 0xffc00000 - not OK
Expected: 0x00526fa1
Bypass-test: 0xffd00000 - not OK
Expected: 0xaaab5554

Testing cabletype 4
JTAG-IDCODE: 0x00526fa1 - OK
Bypass-test: 0xaaab5554 - OK

Cable type 4 detected.
Device is in debug-mode - OK

Reading CPU-Type (SL3516)
CPU-ID: 0x000000 - not OK
Expected: 0x00003516 or 0x00003512
CPU-Rev.: 0x00

Reading CPU-Type (SL3316)
CPU-ID: 0x000000 - not OK
Expected: 0x00003316
CPU-Rev.: 0x00


Some errors detected!

:comp01:

7

Wednesday, June 15th 2011, 10:34am

No one can help me? :S

HWguru

NAS2000-Team

Mesajlar: 1,001

Konum: Wien

8

Wednesday, June 15th 2011, 10:45am

No,
if you power off it will not work!

There is an electrical problem with your setup or the power supply is defective.

HWguru
Leute ohne Laster haben oft wenige Tugenden...
NAS2000 2.3.2.IB.2.RS.1+Lüfterabschaltung+SSH+do_it+zusätzliche commandline tools+changed root password
1. suchen - lesen - Google - lesen - 1. Fragen gehören ins Forum, dann profitieren alle davon!

9

Wednesday, June 15th 2011, 10:53am

so...It can not be restored? :(