mercredi 22 novembre 2017, 19:28 UTC+1

Vous n’êtes pas connecté.

  • Connexion
  • S’inscrire

Bonjour, visiteur, bienvenue sur les forums NAS Forum. Si c’est votre première visite, nous vous invitons à consulter l’Aide. Elle vous expliquera le fonctionnement de cette page. Pour avoir accès à toutes les fonctionnalités, vous devez vous inscrire. Pour cela, veuillez utiliser le formulaire d’enregistrement, ou bien lisez plus d’informations sur la procédure d’enregistrement. Si vous êtes déjà enregistré, veuillez vous connecter.

1

jeudi 22 décembre 2011, 00:37

Unbricking NAS G101

Hi,

I just bricked my G101 nas adapter. As I see on wiki, there is 2 ways of unbricking. First is with serial adapter and if that fails, with JTAG. I want to try first method but when I open my device there is no such header for connection. Can someone tell me where to find rx, tx and gnd pins?I have jp1 who have 5 pins and that is closest to the rs232 header. :) Pls help

HWguru

NAS2000-Team

Messages: 1 001

Localisation: Wien

2

jeudi 22 décembre 2011, 09:20

Hi and welcome!

Could you provide us a photo of your board?
I am not sure which hardware you actually have.

In any case you need a 3.3V serial adapter.
Normally GND is directly connected to the copper plane around the pins.

If you connect GND and VCC (depends on the type of adapter if VCC is required) you could look for the Tx pin of the NAS by connecting Rx of your adapter.
When switching on the nas you should see the messages of the bootloader.

HWguru
Leute ohne Laster haben oft wenige Tugenden...
NAS2000 2.3.2.IB.2.RS.1+Lüfterabschaltung+SSH+do_it+zusätzliche commandline tools+changed root password
1. suchen - lesen - Google - lesen - 1. Fragen gehören ins Forum, dann profitieren alle davon!

3

dimanche 25 décembre 2011, 00:52

Here are the board pics.




Other question, I have firmware in img format, is there any solution to decompress it to three files needed for repairing?

HWguru

NAS2000-Team

Messages: 1 001

Localisation: Wien

4

lundi 26 décembre 2011, 12:11

Hi,
ahh this NAS cannot be unbricked this way. It is not based on a 3316 or similar CPU.
The MRT NAS-G101 (also found some other brands) uses a different processor and hardware.

There is a German post about this product which refers to an English post at MRT forum describing a bit more details.

The image seems to be contents of the whole FLASH memory.

Regards,
HWguru
Leute ohne Laster haben oft wenige Tugenden...
NAS2000 2.3.2.IB.2.RS.1+Lüfterabschaltung+SSH+do_it+zusätzliche commandline tools+changed root password
1. suchen - lesen - Google - lesen - 1. Fragen gehören ins Forum, dann profitieren alle davon!