Wednesday, November 22nd 2017, 6:26am UTC+1

You are not logged in.

  • Login
  • Register

Dear visitor, welcome to NAS Forum. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

1

Saturday, June 1st 2013, 2:05am

35HD-DUALIDA-NAS won't boot with two hdd attached

Hi,
First of all, many thanks for your very informative wiki. I've followed your advice and successfully unbricked my MRT Dual HDD NAS (IDE). Reloaded the bootloader with JTAG, then uploaded the firmware via telnet. I've also upgraded to firmware to .............B34 via the web gui. However, I have a problem that I don't seem to be able to get around. The NAS boots with one HDD connected, but unable to boot when both drives are attached. I've attached the drives to the NAS one by one and formatted them as ex2 however, when both drives are attached the NAS becomes inaccessible. The lights are on, but pressing the power switch turns the device off instantly. When I remove drive two, the NAS behaves properly again. I've tried swapping the drives and in position one they both work fine. I was wondering if anybody had this issue and if so, was there a fix,
:think:

AQUAR

Trainee

Posts: 100

Location: Australia

2

Sunday, June 9th 2013, 9:07am

Just a thought - do the HDD's spin up?

If not, it might be a power supply issue.

HWguru

NAS2000-Team

Posts: 1,001

Location: Wien

3

Wednesday, July 3rd 2013, 11:14am

Hi,
another idea - did you check the Jumpers of the drives.
Could be a master/slave/cs Problem.

If both drives use the same interface (one cable) one has to be master and one slave.
The cable select setting may not work.

HWguru
Leute ohne Laster haben oft wenige Tugenden...
NAS2000 2.3.2.IB.2.RS.1+Lüfterabschaltung+SSH+do_it+zusätzliche commandline tools+changed root password
1. suchen - lesen - Google - lesen - 1. Fragen gehören ins Forum, dann profitieren alle davon!