Tuesday, November 21st 2017, 5:21am UTC+1

Giriş yapmadınız.

  • Giriş
  • Kayıt

Sayın ziyaretçi, NAS Forum sitesine hoş geldiniz. Eğer buraya ilk ziyaretiniz ise lütfen Yardım bölümünü okuyunuz. Yardım bölümü bu sitenin nasıl çalıştığını açıklamaktadır. Site özelliklerinin tümünü kullanabilmeniz için öncelikle kayıt yaptırmanız gerekmektedir. Kayıt yaptırmak için kayıt formunu okuyabilir ya da kayıt işlemi hakkında daha fazla bilgi edinebilirsiniz. Eğer önceden kayıt yaptırdıysanız, buraya tıklayarak giriş yapabilirsiniz.

1

Saturday, June 1st 2013, 2:05am

35HD-DUALIDA-NAS won't boot with two hdd attached

Hi,
First of all, many thanks for your very informative wiki. I've followed your advice and successfully unbricked my MRT Dual HDD NAS (IDE). Reloaded the bootloader with JTAG, then uploaded the firmware via telnet. I've also upgraded to firmware to .............B34 via the web gui. However, I have a problem that I don't seem to be able to get around. The NAS boots with one HDD connected, but unable to boot when both drives are attached. I've attached the drives to the NAS one by one and formatted them as ex2 however, when both drives are attached the NAS becomes inaccessible. The lights are on, but pressing the power switch turns the device off instantly. When I remove drive two, the NAS behaves properly again. I've tried swapping the drives and in position one they both work fine. I was wondering if anybody had this issue and if so, was there a fix,
:think:

AQUAR

Stajyer

Mesajlar: 100

Konum: Australia

2

Sunday, June 9th 2013, 9:07am

Just a thought - do the HDD's spin up?

If not, it might be a power supply issue.

HWguru

NAS2000-Team

Mesajlar: 1,001

Konum: Wien

3

Wednesday, July 3rd 2013, 11:14am

Hi,
another idea - did you check the Jumpers of the drives.
Could be a master/slave/cs Problem.

If both drives use the same interface (one cable) one has to be master and one slave.
The cable select setting may not work.

HWguru
Leute ohne Laster haben oft wenige Tugenden...
NAS2000 2.3.2.IB.2.RS.1+Lüfterabschaltung+SSH+do_it+zusätzliche commandline tools+changed root password
1. suchen - lesen - Google - lesen - 1. Fragen gehören ins Forum, dann profitieren alle davon!